10 ports POE ehternet switch with 8 POE ports , 2 gigabit ethernet ports , each POE ports
15.4W for monitoring camera
Devices that use Power over Ethernet
POE has many applications, but the three key areas are:
VoIP phones - the original POE application. Using POE means phones have a single connection to a wall
socket, and can be remotely powered down, just like with the older analog systems.
IP cameras - POE is now ubiquitous on networked surveillance cameras, where it enables fast deployment and easy repositioning.
Wireless - Wifi and Bluetooth APs and RFID readers are commonly PoE-compatible, to allow remote location away from AC outlets, and relocation following site surveys
How to upgrade to POE
Adding POE to your network is straightforward, and there are two routes you can choose:
A POE switch is a network switch that has Power over Ethernet injection built-in. Simply connect other network devices to the switch as normal, and the switch will detect whether they are POE-compatible and enable power automatically.
POE switches are available to suit all applications, from low-cost unmanaged edge switches with a few ports, up to complex multi-port rack-mounted units with sophisticated management.
A midspan (or POE injector) is used to add POE capability to regular non-POE network links. Midspans can be used to upgrade existing LAN installations to POE, and provide a versatile solution where fewer POE ports are required. Upgrading each network connection to POE is as simple as patching it through the midspan, and as with POE switches, power injection is controlled and automatic.
Midspans are available as multi-port rack-mounted units or low-cost single-port injectors.
10 ports 10/100/1000M POE Switch is a Gigabit POE Switch,Which is cost-effective provide network layout need to simplify wireless access point (AP) and IP-based surveillance cameras network cameras in order to install in commercial network and home network. The devices far away from power socket are very suitable for hanging on the wall or ceiling. PoE eliminates the need for connecting these devices to power socket. So it make more flexible for those difficult to connect with AC power socket, and cut down the installation cost. It is ideal choice for those want to deploy a small commercial network and home network that use wireless access point (AP) and IP-based surveillance cameras.
Features
◆IEEE 802.3af power on up to 8 ports
◆Supply power to wireless access points and surveillance cameras over Cat-5 cabling
◆10*10/100/1000 Mbps Ports with AutoUplink™
◆Supports PoE power up to 15.4W for each PoE port
◆Supports PoE power up to 150W for all PoE ports
◆Supports PoE IEEE 802.3af compliant PDs
◆Supports IEEE 802.3x flow control for Full-duplex Mode and back pressure for Half-duplex Mode
◆1K entry MAC address table of the PoE Switch with auto-learning and auto-aging
◆LED indicators for monitoring power, link
◆Support Vlan and Extend Function
◆Internal power adapter supply
Specification
 Technical parameter list |
| Product Name |
10-Ports AF PoE Switch with 8 PoE Ports and 2 Gigabit Uplink |
| Connector Type |
10* 10/100/1000M copper cable RJ45 ports(8 PoE ports+2 Uplink) |
| Network Media |
10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or more UTP (≤100 meter) |
| Bandwidth |
20Gbps (non-blocking) |
| Address Database Size |
8K |
| MTBF |
190,000 hours (about 21 years) |
| Forwarding Mode |
Store-And-Forward |
| Network Protocols |
IEEE 802.3i 10BASET; IEEE 802.3u 100BASETX; IEEE 802.3x Flow Control;
IEEE 802.1af DTE Power via MDI; IEEE 802.3af
|
| LED Display |
System: power supply; Every Port: connecting, PoE working status |
| Power Supply |
Power input: AC100-240V 50/60Hz; (every country use a custom power plug) |
| PoE Ports |
Port 1-8 support POE |
| PoE Port Power |
15.4W for each POE port |
| PoE Standard |
IEEE 802.3af |
| Led indicator |
Green: Ethernet
Red:PoE
|
| Working Environment |
Operating Temperature: -20° ~ 55 ° C; Storage Temperature: -40 ° ~ 85 ° C;
Operating Humidity: 10% ~ 95%, non-condensing
|
| Certification |
CE Mark ,commercial; CE/LVD EN60950, RoHS |
| Radiation |
CE mark, commercial; FCC Part 15 Class B; VCCI Class B; EN 55022 (CISPR 22), Class B |
| Transmission Distance |
Data transmission distance: 100m |
| Warranty |
3 year warranty(1 yeas warranty for power adapter) |
Product Tags:
|
|
Black Color 8 Port POE Ethernet Switch , POE Powered Switch For Monitoring Camera Images
|
